Edge Connector Strap Anchors -GUNMETAL
The "Edge Connector" strap anchors sit on the top edge of your tote bags to make a very neat and clean bag strap attachment.
Make a trendy new tote in fabric, vinyl, leather, or canvas, and use these lovelies to attach your bag straps.
Sold in a 4 Pack The strap ring is just under 1" (inside) across the top, so these would work well with either 1" or 3/4" straps & bag handles. Each anchor comes assembled with 2 screws.
Tip: Make sure you stabilize the insertion area on your fabric so that it is strong and durable (peltex or similar between layers). Remove the 2 screws and back plate.
Use the back plate to mark holes, and a leather punch to cut holes the same size as the threaded "columns". Use glue on the inside of the connector and back plate, and a thread locking liquid like "loctite" to keep screws secure.
Measurements: Inside measurement of strap ring: 7/8in (23 mm) Overall Length: 1-3/4in (47 mm) Overall Width: 1-1/8in (27 mm)
|Unit Of Measure||Each|
Others Also Bought
More From This Category