OESD - Polymesh - Black
AVAILABLE QTY
1A Stitcher’s favourite!
- Excellent for use with thinner fabrics to prevent show-through of stabiliser
- Soft but very strong, a good choice for knits and stretchy fabrics
- Securely holds embroidery stitches on garments or projects through repeated washing and wearing
- Soft finish prevents skin irritation
Roll is 10 yards of Cut-a-away black stabiliser
PolyMesh Cutaway Stabiliser Instructions for Use
• Cut one or more pieces of PolyMesh CutAway stabilizer about 2”
larger than the hoop.
• Spray the PolyMesh CutAway with temporary spray adhesive. If you
are using multiple layers of stabilizer, adhere all layers together with
temporary spray adhesive.
• Center the sprayed side of the PolyMesh over the design area on the
back of the fabric to be embroidered.
• Gently smooth into place.
• Hoop the item making sure that the PolyMesh completely fills the
hooped area.
• HINT: A topper, StitcH2O or Heat2Go, should be used on top of all knits,
fleece, terry cloth, and other fabrics with a texture or pile.
• Embroider the item.
REMOVAL INSTRUCTIONS:
• Remove the embroidered item from the hoop.
• Lay the embroidered item on a hard, flat surface with the stabilizer
side down.
• Lift and fold the embroidered fabric away from the stabilizer and
carefully trim the excess stabilizer away.
• For multiple layers of stabilizer, trim one layer at a time.
(HBC15-10B)
SKU | HBC15-10B |
Brand | Oklahoma Embroidery & Design |
Shipping Weight | 0.1200kg |
Shipping Width | 0.050m |
Shipping Height | 0.010m |
Shipping Length | 0.050m |
Shipping Cubic | 0.000025000m3 |
Unit Of Measure | Each |